Inflatable vest 150N EN ISO 12402-3

Here automatic release version with a metal buckle and safety belt (D ring). For lifeline.


--
"SIMI" LIFE JACKET
The new "SIMI" inflatable lifejacket from EVAL combines minimum bulk with comfort.
Suitable for all types of high-speed craft and sailboats, swimmers and non-swimmers, for use in unprotected waters, even if the user is wearing heavy clothing.
The vest brings the person, even unconscious, back to a safe position and complies with all the requirements of the
market, European regulations and the EN ISO12402-3 150N standard.
When fully deployed, provides even higher buoyancy of 165N.

Available in 6 models: Here automatic release version with a metal buckle and safety belt (D ring).

The inflatable chamber is made of visible yellow fabric and folded into a suitable nylon cover that closes with Velcro; the vest is equipped with an EN ISO 12402-8 approved whistle, a mouthpiece for mouth inflation, a rescue buckle/strap.
Fitted with SOLAS-approved retro-reflective strips;
all the materials used in its manufacture comply with European standard EN ISO 12402-7.
The life jacket inflation trigger device
rescue is particularly sensitive, precise and easy to repack.
The automatic device is designed in such a way that there is a very small chance of activation due to humidity, shocks or violent movements.
The device is compatible with the majority of 33 g CO2 cartridges available on the market.
With single inflatable chamber.

Red color

IMPORTANT INFORMATION!
Life jackets reduce the risk of drowning but do not guarantee survival.
Impermeable clothing also does not provide optimum performance.
Refer to brochure. Try the lifejacket on before use to check its performance. Until the inflation is completed, the product cannot be called a life jacket. Vest for swimmers. Practice before using this device. Do not use a cushion. The whistle located inside the cover is easily accessible once the lifejacket is deployed. A deflated lifejacket offers no safety to its wearer. In the event of a breakdown of the gas device, the wearer must inflate the lifejacket by mouth via the tube provided for this purpose. The optional light is arranged on the left side of the lifejacket. This is activated automatically in the event of immersion. The optional hood located in the protective collar cover deploys during inflation. Put the hood on the head and tie it by tightening the elastic cord around the inflatable chambers. Slip on like a vest, over any other clothing.
Fasten the lifejacket with the front buckle and the webbing buckle. Tighten the vest/strap as much as possible without it becoming uncomfortable. The lifejacket has three buttons allowing it to be attached to certain windbreakers. The lifejacket must be worn
above any safety harness. The inflation time may be longer when the temperature is below 5°C. When worn in combination with a Baltic hood, the lifejacket is suitable for all sea and weather conditions, except in polar cold conditions. NB the colder the water, the lower the chances of survival. The vest of
rescue should be checked and serviced annually by a Baltic Service Center. Store the lifejacket in a dry, well-ventilated place. Under normal conditions of use, the life of this product is estimated at 10 years.

Reference in HP. Order only quantities available in Stock.