Torqeedo Cruise 10.0 TS engine
Torqeedo Cruise 10.0 TS engine
Electric outboard for motorboats and sailboats up to 10 tons
- Tiller handle model
- 12 kW peak power, 10 kW continuous power – propulsion as powerful as a 20 HP combustion engine
- Intelligent on-board computer and all the convenience of a Torqeedo electric motor
- Electric tilting mechanism for comfortable use
- Simple handling thanks to low voltage design (48 volts)
- Very robust design – corrosion protection, suitable for use at sea, waterproof from all angles (IP67)
- Elegant and modern line thanks to an extra-flat design
- Variants: Short shaft S: shaft length 38.5 cm, long shaft L 51.2 cm, extra long shaft XL 63.9 cm
- Weight: 60.3kg (S), 61.8kg (L), 63.0kg (XL)
- For operation of the Cruise 10.0 with more than two Power 48-5000 batteries, please contact your Torqeedo dealer.
- Please note that motor power is reduced to 6kW when running on a single Power 48-5000 battery
Cruise motors are the electric outboard motors of choice for powerboats, dinghies, and commercial uses. All Cruise systems are equipped with an integrated GPS with on-board computer and display showing input speed and power, charge status and remaining range. The drive unit is compact, lightweight and low drag thanks to advanced helical gear design. The Cruise 10.0 T is an outboard equipped with a 48 volt rudder, with an output equivalent to 20 horsepower, perfect for boats up to 10 tons.
Cruise 10.0 T - The advantages:
- High-efficiency outboard with 10,000W input power, equivalent to the thrust of a 20hp gasoline outboard
- Pair two Power 48-5000 for optimal performance and precise range control
- Also compatible with batteries of other brands (48 volts): However, it must be ensured that they correspond to the power requirements of the engine and add a wiring harness (reference 1979-00 ), the 48-5000 power is strongly recommended for best engine performance
- o T-models are equipped with a rudder/control element with display screen and a magnetic key for emergency stop (included in the scope of delivery)
- Robust baseplate with integrated centreboard – additional protection in the event of grounding
- Premium grade saltwater resistant aluminum for extended maintenance even in the harshest conditions
- Complete galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties - supplied with a set of anodes for fresh and salt water
Cruise 10.0 T with 2 Power 48-5000 batteries
Speed in knots (km/h)* | Range in miles (km)* | Autonomy in hours (hh:mm) | |
---|---|---|---|
Low revs | 4.2 (7.8) approx. | 32.0 (60.0) approx. | 06:00 |
Full throttle | 14.0 (26.5) approx. | 14.0 (26.5) approx. | 01:00 |
* Depending on the type of boat, loading, propeller and environmental protection conditions. Speeds and ranges given without prejudice.
Range and Speed - Notes
In Archimedean mode, the motor power required rises to the speed power three, c. to d. that to double its speed on the water, it is necessary to multiply the power by eight.
On the other hand, it is enough to reduce the speed slightly to increase the autonomy significantly.
The Cruise's on-board computer continuously calculates the remaining range based on engine consumption parameters, battery charge status and ground speed transmitted by the GPS, and displays the remaining distance in real time. on the engine display and on the TorqTrac Smartphone app.
instruction manual
Declaration of conformity
Your information material ‐ Everything at a glance
You will find all important information about the Cruise in our digital brochure. Download the PDF quickly and easily or read it online conveniently while protecting the environment.
Spécifications
Spécifications
Cruise 10.0T
Input Wattage 10,000
Propulsion power in watts 5,600
Equivalent to a thermal outboard of 20 HP (propulsive power)
Equivalent to a 25 HP (thrust) thermal outboard
Maximum overall return in % 56
Static thrust in lbs* ≤ 405
Built-in battery -
Nominal voltage in volts 48
Final charging voltage in volts -
Total weight in kg 60.3 (S) / 61.8 (L) / 63.0 (XL)
Motor weight without battery in kg -
Integrated battery weight in kg -
Shaft length in cm 38.5 (S) / 51.2 (L) / 63.9 (XL)
standard propeller
(v = speed in km/h for power p in watts) v22/p10k
Other propellers to choose from v32/p10k & v15/p10k
The instruction of the propellers
Maximum propeller speed at full throttle in rpm 1,400
Remote Control Joystick Control
Steering Socket for standard remote joystick
Hydro-electric lifting with overload circuit breaker / auto by hydraulic valves in case of running aground
Tilt angle +-45°
Manual trim, 4 positions
Integrated on-board computer Yes
Forward/Reverse Continuous Acceleration Yes
Matériau
Matériau
Informations complémentaires
Informations complémentaires
Article number: 1243-20 | EAN: 4260113696194
Scope of supply: Engine with tiller control and integrated on-board computer with display, magnetic emergency stop chip, connection cable set for two Power 48-5000 batteries (total length approx. 4.5 m) with main switch and battery terminal screws, 5-pin data cable (5m), standard v22/p10k propeller and sacrificial anodes (Al)
The TorqLink gateway set (2217-00) is required for operation: This is not included in the scope of the service
Warranty: 2 years for private use